Skylight (1500×2000)

£835.00 inc. VAT

This item's estimated to be back into stock Mid July 2022

This high-performance, non-opening skylight is triple glazed with 6mm toughened, self-cleaning glass. All of our units are extremely high-quality with a U Value of just 0.75 W/m. Our rooflights are low-maintenance and provide exceptional heat insulation, light transmission and noise reduction. For a quick and simple installation, we also can supply a rebated timber frame.

Clear

Buy 2
for 4% discount!

Buy 3
for 5% discount!

Buy 4+
for 10% discount!

SKU: CRL24

Category:



Description

  • Triple Glazed with 6mm toughened self-cleaning glass
  • U Value of only 0.75 W/m
  • Contemporary Black Edged Glass
  • Warm edge spacer bar filled with Argon gas
  • Suitable for flat and pitched roofs
  • Compatible with EDPM, GRP, Felt, All Tiles and Corrugated roofs
  • We guarantee it will never leak
  • Timber Frame (purchase separately)
  • Technical Phone support
  • Rooflights/Skylights Technical Measurement

Please note: The sizes we quote are inside structural opening sizes both ‘Inside joist’ & ‘Visible glass area’.

Additional information

Product Options

Rooflight, Rooflight with Timber frame

Glass Specification

  • 6mm clear toughened glass which is self-cleaning
  • 16mm warm edge spacer bar filled with Argon Gas
  • 6mm toughened clear soft coat Low E glass
  • 16mm warm edge spacer bar filled with Argon Gas
  • 6mm toughened clear soft coat Low E glass
  • BSEN12150C1*
  • CE

Energy Efficiency

Our triple glazed fixed models boast a system U Value (how effective a material is as an insulator) of 0.83W/m. This means you won’t have any unnecessary heat loss from our units, unlike most of our competitors who have a much higher U Value of around 1.2W/m. On average our units are 40% more efficient than required by Building Regulations.

Safety

When it comes to choosing a rooflight for your property, safety is an important factor. With this in mind, all our units are made from toughened soft coat (Low E) glass with an overall thickness of 46mm.

Fitting instructions

When installing your rooflight it is best to set at a slight gradient to allow water to run off the glass (we recommend to set the rooflight at a gradient of 50mm for every 1000mm). The kerb consists of 4 lengths of timber fixed to the roof forming a box-shaped kerb. Once the kerb has been fitted, you can apply felt or fibreglass up to the kerb, then silicone the top of the kerb which encapsulates the glass unit making it 100% watertight.

Our rooflights can be fitted by roofers, builders, or anyone that is confident in DIY. We will send you a fully illustrated fitting guide with a detailed diagram of the dimensions to ensure you have everything you need when fitting this high-quality rooflight.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.